John Deere 3000 TWENTY and 4000 TWENTY series recall

Deere & Company Press Release
-

In voluntary cooperation with the U.S. Consumer Product Safety Commission (CPSC), Deere & Company is recalling certain 3000 TWENTY Series and 4000 TWENTY Series Compact Utility Tractors (CUTs).

PROBLEM:
There is the possibility that some of the seat belt brackets welded onto the seat's pivot plate bracket of the 3000 TWENTY Series and 4000 TWENTY Series Compact Utility Tractors may fail. Failure of the seat belt bracket could adversely affect the use of the seat belt, which is intended to protect the tractor operator in the event of a roll over. The suspect seat belt brackets are where the seat belt fastens to the seat.

PRODUCT:
John Deere models in the following serial number ranges.

ModelSerial Number Ranges
3120 CUT with Hydrostatic TransmissionLV3120H210126 through LV3120H210552
3320 CUT with Hydrostatic TransmissionLV3320E138296
3320 CUT with Hydrostatic TransmissionLV3320E245001 through LV3320E245250
3320 CUT with PowrReverser TransmissionLV3320F139038
3320 CUT with PowrReverser TransmissionLV3320F250001 through LV3320F250015
3320 CUT with Hydrostatic TransmissionLV3320H230163 through LV3320H231295
3320 CUT with PowrReverser TransmissionLV3320P240043 through LV3320P240199
3520 CUT with Hydrostatic TransmissionLV3520E270019 through LV3520E270240
3520 CUT with PowrReverser TransmissionLV3520F275002 through LV3520F275029
3520 CUT with Hydrostatic TransmissionLV3520H258079
3520 CUT with Hydrostatic TransmissionLV3520H258205 through LV3520H258988
3520 CUT with PowrReverser TransmissionLV3520P266001 through LV3520P266169
3720 CUT with Hydrostatic TransmissionLV3720E290014 through LV3720E290325
3720 CUT with Hydrostatic TransmissionLV3720H280020 through LV3720H280669
4120 CUT with Hydrostatic TransmissionLV4120H310005 through LV4120H310220
4120 CUT with PowrReverser TransmissionLV4120P317068 through LV4120P317435
4320 CUT with Hydrostatic TransmissionLV4320E338001 through LV4320E338011
4320 CUT with PowrReverser TransmissionLV4320F339002 through LV4320F339008
4320 CUT with Hydrostatic TransmissionLV4320H320037 through LV4320H320562
4320 CUT with PowrReverser TransmissionLV4320P330037 through LV4320P330286
4520 CUT with Hydrostatic TransmissionLV4520E358001 through LV4520E358223
4520 CUT with PowrReverser TransmissionLV4520F360006 through LV4520F360052
4520 CUT with Hydrostatic TransmissionLV4520H250391
4520 CUT with Hydrostatic TransmissionLV4520H340043 through LV4520H340385
4520 CUT with PowrReverser TransmissionLV4520P255680
4520 CUT with PowrReverser TransmissionLV4520P347024 through LV4520P347334
4720 CUT with Hydrostatic TransmissionLV4720H370053 through LV4720H370771

WHAT TO DO:

  1. Please contact your John Deere Dealer immediately to make arrangements for installation of improved parts. All parts will be installed without cost to you.
  2. If the welds on the seat belt bracket are cracked or the seat belt bracket has already failed, do not drive the tractor until your John Deere Dealer has repaired it. Note: The suspect seat belt brackets are the brackets that the seat belt retractor and buckle bolt to; one on the left side of the seat and one on the right side.
  3. Inform everyone who operates the tractor of the potential danger.

If you have any questions, please call the John Deere Customer Contact Center at 1-800-537-8233.

©2000-2023 - TractorData.com®. Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before attempting any service or repair.