| 1988 - 1992 |
300 Series | Garden tractor |
|
Series map:
318
322
332
18.0hp
18.0hp
16.0hp
Attachment overview |
38" mid-mount mower deck |
46" mid-mount mower deck |
50" mid-mount mower deck |
Snowblower |
Blade |
Front-end loader |
Two tillers were available for the 322, a 48-inch shaft drive and a 30-inch hydraulic tiller (with optional extension to 42 inch). The shaft-drive tiller required the optional 2000 RPM rear PTO. The hydraulic tiller operated off a separate hydraulic pump that was belt-driven in place of the mower deck. A rear-mounted finish mower was available for the 318, if equipped with three-point hitch and 2000 RPM rear PTO. |
John Deere BM16600
38 inches
96 cm
Total width: 49.7 inches
126 cm
2-blade
hydraulic lift
Cut height: 1 to 4 inch
2 to 10 cm
100 lbs
45 kg
Belt: John Deere M89090 (primary -SN555000)
Belt: John Deere M71729 (primary SN555001+)
Belt: John Deere M82538 (secondary)
John Deere BM16376
46 inches
116 cm
Total width: 57 inches
144 cm
3-blade
hydraulic lift
Cut height: 1.5 to 5 inch
3 to 12 cm
116 lbs
52 kg
Belt: John Deere M82718 (primary)
Belt: John Deere M41668 (secondary)
John Deere BM16377
50 inches
127 cm
Total width: 68 inches
172 cm
3-blade
hydraulic lift
Cut height: 1.5 to 4 inch
3 to 10 cm
186 lbs
84 kg
Belt: John Deere M82718 (primary)
Belt: John Deere M41668 (secondary)
John Deere 0611M
front-mount
54 inches width
137 cm
18 inches height
45 cm
12 inches lift
30 cm
3.5 inches cut
8 cm
hydraulic-lift
manual-angle
hydraulic optional-angle
John Deere G049 0603M
46 inches width
116 cm
single-stage
front-mount
hydraulic-lift
200 lbs
90 kg
John Deere 47 2752M
47 inches width
119 cm
dual-stage
Clear height:23 inches
58 cm
front-mount
hydraulic-lift
400 lbs
181 kg
400 lbs lift (full at pin)
181 kg
575 lbs breakout (bucket)
260 kg
50° dump
44 inches reach (ground)
111 cm
20° rollback
71.5 inches height (at pin)
181 cm
21 inches clearance (dumped)
53 cm
weight: 500 lbs
226 kg
Bucket width: 48 inches
121 cm
Bucket width: 54 inches
137 cm
Bucket capacity: 0.21 cu yd
0.2 cu m
Bucket capacity: 0.24 cu yd
0.2 cu m
Page information |
|
Copyright 2024 TractorData.com® |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
Peter Easterlund - owner/author |
Email: Peter@TractorData.com |
Updated on September 21, 2023 |
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.