Engine options | |
Allis-Chalmers 2.6L 4-cyl gasoline | |
Allis-Chalmers 2.9L 4-cyl diesel | |
Allis-Chalmers 3.3L 4-cyl diesel |
Engine Detail | |
Allis-Chalmers | |
gasoline | |
4-cylinder | |
liquid-cooled | |
Displacement | 160 ci 2.6 L |
Bore/Stroke | 3.625x3.625 inches 92 x 92 mm |
Power | 56.8 hp 42.4 kW |
Compression | 8:1 |
Rated RPM | 2000 |
Torque | 154 lb-ft 208.8 Nm |
Torque RPM | 1624 |
Starter volts | 12 |
Oil capacity | 4 qts 3.8 L |
Coolant capacity | 10 qts 9.5 L |
Sparkplug | ACDelco C-45 |
  | Champion J-7 |
  | Auto-Lite A-5 |
Sparkplug gap | 0.023 inches 0.584 mm |
Point gap | 0.022 inches 0.559 mm |
Intake valve clearance | 0.009 inches (hot) 0.229 mm |
Exhaust valve clearance | 0.015 inches (cold) 0.381 mm |
Engine Detail | |
Allis-Chalmers | |
diesel | |
4-cylinder | |
liquid-cooled | |
The 175 diesel engine was used in the Allis-Chalmers 615 from the start of production until serial number 5001, likely in mid-1966. | |
Displacement | 175 ci 2.9 L |
Bore/Stroke | 3.5625x4.375 inches 90 x 111 mm |
Power | 44 hp 32.8 kW |
Compression | 15.5:1 |
Rated RPM | 2000 |
Engine Detail | |
Allis-Chalmers D2200 | |
diesel | |
4-cylinder | |
liquid-cooled | |
The Allis-Chalmers 615 received the 200 diesel engine at serial number 5001. | |
Displacement | 200 ci 3.3 L |
Bore/Stroke | 3.875x4.125 inches 98 x 105 mm |
Power | 57 hp 42.5 kW |
Compression | 16.25:1 |
Rated RPM | 2000 |
Idle RPM | 650-2200 |
Torque | 153 lb-ft 207.5 Nm |
Torque RPM | 1750 |
Firing order | 1-2-3-4 |
Starter volts | 12 |
Oil capacity | 9 qts 8.5 L |
Coolant capacity | 13.5 qts 12.8 L |
Intake valve clearance | 0.015 inches (hot) 0.381 mm |
Exhaust valve clearance | 0.015 inches (hot) 0.381 mm |
Page information | |
Copyright 2024 TractorData.com® | |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. | |
Peter Easterlund - owner/author | |
Email: Peter@TractorData.com | |
Updated on July 18, 2020 |