| 1984 - 1988 |
Industrial tractor |
|
Series map:
445A
545A
48.0hp
60.0hp
Transmission options |
8-speed |
6-speed |
4-speed |
Transmission |
Transmission | Manual-shift
|
Gears | 8 forward and 2 reverse
|
Oil capacity | 13 qts 12.3 L
|
Four speeds, plus reverse, with two ranges. |
Speeds |
445A equipped with 16.9-24 rear tires. |
|
Transmission |
Transmission | Manual-reversing
|
Gears | 6 forward and 4 reverse
|
Oil capacity | 13 qts 12.3 L
|
Three forward and two reverse speeds with high and low range. |
Speeds |
445A equipped with 16.9-24 rear tires. |
|
Transmission |
Transmission | Torque Converter
|
Gears | 4 forward and reverse
|
Oil capacity | 19 qts 18.0 L
|
Four speeds in each direction with torque converter. The torque converter has a 2.78-to-1 torque multiplication ratio and a stall speed of 2050 rpm. A power-take-off (PTO) was not available on the 445A with the torque-converter transmission. |
Speeds |
445A equipped with 16.9-24 rear tires. |
|
Page information |
|
Copyright 2024 TractorData.com® |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
Peter Easterlund - owner/author |
Email: Peter@TractorData.com |
Updated on August 6, 2010 |
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.