Massey Ferguson 9S.425
| 2024 - |
9S Series | Row-Crop tractor |
|
Series map:
9S.400
9S.425
400.0hp
425.0hp
Production |
Manufacturer | Massey Ferguson (a part of AGCO)
|
Row-Crop tractor |
Built in Beauvais, France |
Massey Ferguson 9S.425 Power |
Engine | 425 hp 316.9 kW
|
Mechanical |
Four-wheel drive |
Power steering |
Cab standard with air-conditioning. |
Photos |
No photos of the Massey Ferguson 9S.425 are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
Hydraulics |
Type | closed center load sensing
|
Pressure | 2900 psi 200.0 bar
|
Rear valves | 6 OptOptional
|
Front valves | 1 or 2
|
Pump flow | 71.3 gpm 269.9 lpm
|
  | 105.7 gpmOptOptional 400.1 lpm
|
Tractor hitch |
Rear Type | IV/III
|
Rear lift (at ends) | 26455 lbs 11999 kg
|
Power Take-off (PTO) |
Rear PTO | independent
|
Rear PTO Type | 540/1000 (1.375)
|
  | 1000 (1.75)
|
Engine RPM | 540E@1577
|
  | 1000@1882
|
  | 1000E@1605
|
Front PTO | independent
|
Front PTO Type | 1000
|
Engine RPM | 1000@2036
|
Electrical |
Ground | negative
|
Charging system | alternator
|
Battery volts | 12
|
References |
|
MF 9S - Outstanding design, ultimate performance published in 2023, by Massey Ferguson |
Page information |
|
Copyright 2024 TractorData.com® |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
Peter Easterlund - owner/author |
Email: Peter@TractorData.com |
Updated on December 17, 2023 |
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.