CaseIH Steiger 400
| 2011 - 2013 |
Four-wheel Drive (4WD) tractor |
|
Production |
Manufacturer | CaseIH
|
Four-wheel Drive (4WD) tractor |
Built in Fargo, North Dakota, USA |
CaseIH Steiger 400 Power |
Engine | 400 hp 298.3 kW
|
PTO (claimed) | 340 hp 253.5 kW
|
Drawbar (tested) | 328.56 hp 245.0 kW
|
PTO (tested) | 400.10 hp 298.4 kW
|
Performance test details ... |
Mechanical |
Four-wheel drive |
Surveyor cab standard. |
Hydraulics |
Type | pressure flow compensating (PFC)
|
Rear valves | 4 to 8
|
Pump flow | 35 gpm 132.5 lpm
|
Total flow | 42 gpm 159.0 lpm
|
  | 56 gpm (High Flow) 212.0 lpm
|
  | 113 gpm (Twin Flow) 427.7 lpm
|
Tractor hitch |
Rear Type | 4N
|
Rear lift | 20,000 lbs 9072 kg
|
Power Take-off (PTO) |
Rear PTO | independent
|
Rear PTO Type | 1000 (1-3/4)
|
Steiger 400 Serial Number Location |
|
Serial number plate on the front left tractor fender, near the steps. |
Electrical |
Ground | negative
|
Charging system | alternator
|
Charging amps | 200
|
Batteries | 2
|
Battery CCA | 1000
|
Battery volts | 12
|
References |
|
Steiger Series Tractors published in 2011, by CaseIH |
Page information |
|
Copyright 2024 TractorData.com® |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
Peter Easterlund - owner/author |
Email: Peter@TractorData.com |
Updated on February 10, 2017 |
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.