Production | |
Manufacturer | AGCO |
Row-Crop tractor | |
Built in Beauvais, France | |
Original price was $112,716 in 2009 with Auto-6 | |
The AGCO RT165A is the same as the Massey Ferguson 6497. |
AGCO RT165A Engine | |
SisuDiesel 7.4L 6-cyl diesel | |
Fuel tank | 100 gal 378.5 L |
Engine details ... |
AGCO RT165A Transmissions | |
24-speed partial power shift | |
continuously variable transmission | |
Transmission details ... |
AGCO RT165A Power | |
Engine | 200 hp 149.1 kW |
PTO (claimed) | 165 hp 123.0 kW |
Drawbar (tested) | 149.8 hp 111.7 kW |
PTO (tested) | 182.4 hp 136.0 kW |
Performance test details ... |
Mechanical | |
Four-wheel drive | |
Differential lock | electro-hydraulc front and rear |
Power steering | |
Hydraulic wet disc brakes | |
Trailer brakes | hydraulic optional |
Cab standard. Optional Airmaxx pneumatic cab suspension and automatic climate control. |
Photos | |
AGCO RT165A photos... |
Hydraulics | |
Type | closed center pressure flow compensated (PFC) |
Pressure | 2900 psi 200.0 bar |
Valves | 3 to 5 |
Total flow | 29 gpm 109.8 lpm |
  | 39 gpmOptOptional 147.6 lpm |
Tractor hitch | |
Rear Type | 3/3N |
Control | electronic position and lower-link draft control |
Rear lift (at 24"/610mm) | 15,700 lbs 7121 kg |
Front Hitch | 2/3 (optional) |
Front lift | 8,800 lbs 3991 kg |
Power Take-off (PTO) | |
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 |
Front PTO | optional |
Front PTO Type | 1000 |
Dimensions & Tires | |
2WD Wheelbase | 115.95 inches 294 cm |
4WD Wheelbase | 118.6 inches 301 cm |
Weight | 17,200 lbs 7801 kg |
Front tire | 420/90R30 |
Rear tire | 480/80R46 (4WD) |
Full dimensions and tires ... |
Electrical | |
Ground | negative |
Charging system | alternator |
Charging amps | 175 |
Batteries | 2 |
Battery CCA | 550 |
Battery volts | 12 |
Page information | |
Copyright 2024 TractorData.com® | |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. | |
Peter Easterlund - owner/author | |
Email: Peter@TractorData.com | |
Updated on April 10, 2020 |