| | 1985 - 1988 |
| Row-Crop tractor |
|
Series map:
8010
8030
8050
119.3hp*
148.6hp*
169.3hp*
*Estimated engine power for comparison only.
Note: the Deutz-Allis model 8030 is the same as the Allis Chalmers 8030. The following data is from the 8030 listing. |
| Transmission options |
| 16-speed partial power shift |
| 20-speed partial power shift |
| 12-speed Allis-Chalmers |
| Transmission |
| Transmission | Allis-Chalmers Power Director
|
| Type | partial power shift
|
| Gears | 16 forward and 4 reverse
|
| Oil capacity | 29.6 qts
28.0 L
|
| Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. |
| Speeds |
| With 18.4x38 rear tires. |
|
| Transmission |
| Transmission | Allis-Chalmers Power Director
|
| Type | partial power shift
|
| Gears | 20 forward and 4 reverse
|
| Oil capacity | 29.6 qts
28.0 L
|
| Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever. |
| Speeds |
| With 18.4x38 rear tires. |
|
| Transmission |
| Transmission | Power Shift
|
| Type | Allis-Chalmers
|
| Gears | 12 forward and 2 reverse
|
| Oil capacity | 29.6 qts
28.0 L
|
| Six power shift gears (1-6) in two ranges (slow/fast). Clutch must be used to shift range. Pressing the clutch pedal half-way automatically downshifts from 5th/6th to 4th gear. |
| Speeds |
| With 18.4x38 rear tires. |
|
| Page information |
 |
| Copyright 2024 TractorData.com® |
| TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
| Peter Easterlund - owner/author |
| Email: Peter@TractorData.com |
| Updated on August 30, 2024 |
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.
