Farmall 1066
| 66 Series | Row-Crop tractor |
|
Series map:
Hydro 100
1066
1468
115.7hp*
140.0hp*
147.8hp*
*Estimated engine power for comparison only.
Note: the Farmall model 1066 is the same as the International Harvester 1066. The following data is from the 1066 listing. |
Production |
Manufacturer | Farmall (a part of International Harvester)
|
Row-Crop tractor |
Built in Rock Island, Illinois, USA |
Total built | 54,947
|
Original price was $21,100 in 1976 |
Farmall 1066 Power |
Drawbar (claimed) | 108 hp 80.5 kW
|
PTO (claimed) | 126 hp 94.0 kW
|
Drawbar (tested) | 105.95 hp 79.0 kW
|
PTO (tested) | 125.68 hp 93.7 kW
|
Performance test details ... |
Mechanical |
Two- or four-wheel drive |
Power steering |
Hydraulic dry disc brakes |
Open operator station. Two-post fixed ROPS available. Cab available with optional air-conditioning. |
Hydraulics |
Type | open center
|
Pump flow | 12 gpm 45.4 lpm
|
Total flow | 21 gpm 79.5 lpm
|
Steering flow | 9 gpm 34.1 lpm
|
Tractor hitch |
Rear Type | III/II
|
Rear lift (at 24"/610mm) | 5600 lbs 2540 kg
|
Power Take-off (PTO) |
Rear PTO | independent
|
Rear PTO Type | 540/1000
|
1066 Serial Number Location |
|
Serial number plate on the left side of the tractor's clutch housing. |
Page information |
|
Copyright 2024 TractorData.com® |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
Peter Easterlund - owner/author |
Email: Peter@TractorData.com |
Updated on July 13, 2022 |
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.