Massey Ferguson 194
| 1977 - 1983 |
104 Series | Utility tractor | Landini built |
|
Series map:
184
194
50.7kw
55.9kw
Production |
Distributor | Massey Ferguson
|
Manufacturer | Landini
|
Utility tractor |
Built in Italy |
Variants |
194 | 2WD
|
194-4 | 4WD
|
8500 | similar Landini model
|
Massey Ferguson 194 Power |
Engine | 75 hp 55.9 kW
|
Mechanical |
Two- or four-wheel drive |
Differential lock | mechanical rear
|
Power steering |
Dry disc brakes |
Open operator station. Cab optional. |
Photos |
No photos of the Massey Ferguson 194 are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
Hydraulics |
Type | open center
|
Pressure | 2418 psi 166.7 bar
|
Total flow | 7.5 gpm 28.4 lpm
|
Tractor hitch |
Rear Type | II
|
Control | position and draft control
|
Rear lift (at ends) | 5842 lbs 2649 kg
|
Power Take-off (PTO) |
Rear PTO | independent
|
Clutch | dry disc
|
Rear PTO Type | 540 (1.375)
|
  | 540/1000 (1.375)OptOptional
|
Engine RPM | 540@1944
|
  | 1000@1916
|
194 Serial Number Location |
|
Serial number stamped into the rear of the tractor, above and to the left of the PTO shaft. |
Electrical |
Ground | negative
|
Battery volts | 12
|
References |
|
Loaders - Compact and Agricultural published in 1989, by Massey Ferguson |
Operator Instruction Book 154 - 174 - 184 - 194 (3300912M2)* |
MF 194-4 4-Wheel Drive Tractor published in 1977, by Massey Ferguson |
*Publication contains known errors. |
Page information |
|
Copyright 2024 TractorData.com® |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
Peter Easterlund - owner/author |
Email: Peter@TractorData.com |
Updated on April 17, 2023 |
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.