CaseIH STX275
| 2000 - 2005 |
Steiger STX Series | Four-wheel Drive (4WD) tractor |
|
Series map:
STX275
STX325
275.0hp
325.0hp
Production |
Manufacturer | CaseIH
|
Four-wheel Drive (4WD) tractor |
Built in Fargo, North Dakota, USA |
The CaseIH STX275 is the same as the New Holland TJ275. |
Variants |
TJ275 | similar New Holland model
|
CaseIH STX275 Power |
Engine | 275 hp 205.1 kW
|
Drawbar (claimed) | 205 hp 152.9 kW
|
PTO (claimed) | 225 hp 167.8 kW
|
Drawbar (tested) | 211.57 hp 157.8 kW
|
PTO (tested) | 274.11 hp 204.4 kW
|
Performance test details ... |
Mechanical |
Four-wheel drive |
Final drives | inboard planetary
|
Steering | hydrostatic power
|
Integrated hydraulic wet disc brakes |
Surveyor Cab standard. |
Photos |
No photos of the CaseIH STX275 are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
Hydraulics |
Type | pressure flow compensated (PFC)
|
Rear valves | 4 to 7
|
SCV flow | 35 gpm 132.5 lpm
|
Total flow | 40 gpm 151.4 lpm
|
  | 55 gpmOptOptional 208.2 lpm
|
Tractor hitch |
Rear Type | IVN/III
|
Rear lift (at 24"/610mm) | 14500 lbs 6577 kg
|
Power Take-off (PTO) |
Rear PTO | independent OptOptional
|
Rear PTO Type | 1000 (1.75)
|
Electrical |
Ground | negative
|
Charging system | alternator
|
Battery volts | 12
|
References |
|
STX Series Steiger Tractors published in 2000, by CaseIH* |
STX Series Steiger Tractors published in 2002, by CaseIH* |
*Publication contains known errors. |
Page information |
|
Copyright 2024 TractorData.com® |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
Peter Easterlund - owner/author |
Email: Peter@TractorData.com |
Updated on October 7, 2023 |
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.