Production | |
Manufacturer | Steiger |
Four-wheel Drive (4WD) tractor | |
Built in Fargo, North Dakota, USA | |
Original price was $74,500 in 1980 |
Steiger Cougar III PT-250 Engine | |
Caterpillar 10.5L 6-cyl diesel | |
Engine details ... |
Steiger Cougar III PT-250 Transmission | |
20-speed constant mesh | |
Transmission details ... |
Steiger Cougar III PT-250 Power | |
Engine | 250 hp 186.4 kW |
PTO (claimed) | 57 hp (540 RPM) 42.5 kW |
  | 105 hp (1000 RPM) 78.3 kW |
Mechanical | |
Four-wheel drive | |
Final drives | outboard planetary |
Articulated power steering | |
Hydraulic disc brakes | |
Safari Cab standard with air-conditioning. |
Photos | |
No photos of the Steiger Cougar III PT-250 are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
Capacity | |
Fuel | 225 gal 851.6 L |
Hydraulic system | 22 gal 83.3 L |
Hydraulics | |
Type | open center |
Capacity | 22 gal 83.3 L |
Pressure | 2250 psi 155.1 bar |
Valves | 4 or 5 |
Pump flow | 20 gpm 75.7 lpm |
Tractor hitch | |
Rear Type | III OptOptional |
Power Take-off (PTO) | |
Rear PTO | independent OptOptional |
Clutch | hydrostatic-drive |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
Wheelbase | 132.5 inches 336 cm |
Weight | 28444 lbs 12902 kg |
Front tire | 18.4-34 |
Rear tire | 18.4-34 |
Full dimensions and tires ... |
Cougar III PT-250 Serial Numbers | |
1979 | 142-00001 |
1980 | 142-00007 |
FAQ: How to read a serial number table. |
Electrical | |
Ground | negative |
Charging system | alternator |
Charging amps | 90 |
Charging volts | 12 |
Batteries | 4 |
Battery CCA | 475 |
Battery volts | 12 |
References | |
Operator's Manual PT225 - PT250 - PT270 -PT350 (37-060) published in 1978 |
Page information | |
Copyright 2024 TractorData.com® | |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. | |
Peter Easterlund - owner/author | |
Email: Peter@TractorData.com | |
Updated on February 9, 2024 |