Production | |
Manufacturer: | Ford-New Holland |
Factory: | England |
Original price: | $44,000 (1999) |
Variants | |
Fiat M100 |
Ford-New Holland 8160 Power | |
PTO (claimed): | 90 hp 67.1 kW |
Ford-New Holland 8160 Engine | |
New Holland 7.5L 6-cyl diesel | |
Engine details ... |
Mechanical | |
Chassis: | 4x2 2WD |
4x4 MFWD 4WD (optional) | |
Differential lock: | Rear (2WD) or front and rear (4WD) with push-button operation. Manual and automatic modes. |
Steering: | hydrostatic power |
Brakes: | differential hydraulic wet disc |
Cab: | Two-post ROPS. Optional cab. |
Transmissions: | 23-speed partially synchronized |
17-speed partial power shift | |
18-speed partial power shift | |
Transmission details ... |
Photos | |
No photos of the Ford-New Holland 8160 are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
Capacity | |
Fuel: | 85 gal 321.7 L |
Hydraulic system: | 23.7 gal 89.7 L (18-speed) |
19.2 gal 72.7 L (23-speed) | |
Front hubs: | 1.8 qts 1.7 L (each) |
Front diff.: | 2.3 qts 2.2 L |
Hydraulics | |
Type: | closed center load sensing |
Capacity: | 23.7 gal 89.7 L (18-speed) |
19.2 gal 72.7 L (23-speed) | |
Pressure: | 2755 psi 190.0 bar |
Valves: | 2 to 4 |
Pump flow: | 26 gpm 98.4 lpm |
Steering flow: | 15.6 gpm 59.0 lpm |
Steering press.: | 2465 psi 170.0 bar |
Tractor hitch | |
Rear Type: | II |
Rear lift (at 24"/610mm): | 8,500 lbs 3855 kg |
Power Take-off (PTO) | |
Rear PTO: | independent |
Rear RPM: | 540/1000 |
Dimensions & Tires | |
Wheelbase: | 108.3 inches 275 cm (2WD) |
107.2 inches 272 cm (4WD) | |
Weight: | 11616 to 12606 pounds |
Front tire: | 11.00-16 |
Rear tire: | 18.4R38 (2WD) |
Full dimensions and tires ... |
Electrical | |
Ground: | negative |
Charging system: | alternator |
Charging amps: | 70 |
100 (with cab) | |
Batteries: | 2 |
Battery CCA: | 900 |
Battery volts: | 12 |
Page information | |
Last update: | January 1, 2011 |
Copyright: | Copyright 2021 TractorData LLC |
Contact: | Peter@TractorData.com |