Production | |
Manufacturer | J.I. Case |
Standard-tread tractor | |
Built in Racine, Wisconsin, USA | |
Original price | $6,400 (1969) |
The 930 Comfort King (930 CK) was introduced in 1962. The entire series was referred to as the Case 930, although the spark-ignition versions used the 940 model number. |
J.I. Case 940 Engines | |
J.I. Case 6.2L 6-cyl gasoline | |
J.I. Case 6.2L 6-cyl LP gas | |
Fuel tank | 30 gal (gas) 113.6 L |
  | 36 gal (LP-gas) 136.3 L |
  | 48 gal (CK) 181.7 L |
Engine details ... |
J.I. Case 940 Transmission | |
6-speed gear | |
Transmission details ... |
J.I. Case 940 Power | |
Belt (claimed) | 83 hp 61.9 kW |
Plows | 6 |
Drawbar (tested) | 69.99 hp 52.2 kW |
PTO (tested) | 79.64 hp 59.4 kW |
Performance test details ... |
Mechanical | |
Two-wheel drive | |
Steering | power assist |
Differential mechanical dry disc brakes | |
Open operator station. |
Photos | |
J.I. Case 940 photos... |
Hydraulics | |
Type | Dual-Control |
Valves | 1 or 2 |
Pump flow | 15 gpm 56.8 lpm |
Power Take-off (PTO) | |
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
Wheelbase | 84 inches 213 cm |
Weight | 8,755 lbs 3971 kg |
Front tire | 7.50-18 |
Rear tire | 15x34 |
Full dimensions and tires ... |
940 Serial Numbers | |
1960 | 8160001 |
1961 | 8168801 |
1962 | 8190001 |
1963 | 8208001 |
1964 | 8229001 |
1965 | 8253501 |
1966 | 8279001 |
1967 | 8306501 |
FAQ: How to read a serial number table. |
Belt Pulley | |
Diameter | 11.75 inches 29 cm |
Width | 8.25 inches 20 cm |
RPM | 1007 |
References | |
1960 Progress Parade of Case Farm Equipment published by J.I. Case | |
A Complete New Line of Case Plus-Powered Tractors published in 1960, by J.I. Case | |
1965 Buyers Guide published by J.I. Case | |
Buyers Guide for '67 published in 1967, by J.I. Case |
Page information | |
Copyright 2024 TractorData.com® | |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. | |
Peter Easterlund - owner/author | |
Email: Peter@TractorData.com | |
Updated on February 14, 2019 |