Production | |
Manufacturer | J.I. Case |
Row-Crop tractor | |
Built in Racine, Wisconsin, USA | |
Original price | $8,600 (1969) |
The Case 930 General Purpose tractor was introduced in 1964 by putting the engine from the 930 Comfort King into an 830 chassis, creating a row-crop version of the 930. In addition to the row-crop chassis, the 930 GP also uses an eight speed transmission instead of the six speed in the 930 standard. |
J.I. Case 931 Engine | |
J.I. Case 6.6L 6-cyl diesel | |
Fuel tank | 30 gal 113.6 L |
  | 48 gal (CK) 181.7 L |
Engine details ... |
J.I. Case 931 Power | |
Belt (claimed) | 83 hp 61.9 kW |
Plows | 6 |
Drawbar (tested) | 72.98 hp 54.4 kW |
PTO (tested) | 85.39 hp 63.7 kW |
Performance test details ... |
Mechanical | |
Two-wheel drive | |
Steering | power assist |
Differential mechanical dry disc brakes | |
Open operator station. |
Photos | |
J.I. Case 931 photos... |
Hydraulics | |
Type | Dual-Control |
Valves | 1 or 2 |
Pump flow | 15 gpm 56.8 lpm |
Tractor hitch | |
Rear Type | II |
Power Take-off (PTO) | |
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
Wheelbase | 108 inches 274 cm |
Weight | 8,915 lbs 4043 kg |
Front tire | 7.50-15 |
Rear tire | 18.4-34 |
Full dimensions and tires ... |
931 Serial Numbers | |
Location: | Plate on instrument panel |
1964 | 8229001 |
1965 | 8253501 |
1966 | 8279001 |
1967 | 8306501 |
1968 | 8332101 |
1969 | 8356251 |
FAQ: How to read a serial number table. |
Belt Pulley | |
Diameter | 11.75 inches 29 cm |
Width | 8.25 inches 20 cm |
RPM | 1007 |
References | |
1960 Progress Parade of Case Farm Equipment published by J.I. Case | |
A Complete New Line of Case Plus-Powered Tractors published in 1960, by J.I. Case | |
1965 Buyers Guide published by J.I. Case | |
Buyers Guide for '67 published in 1967, by J.I. Case |
Page information | |
Copyright 2024 TractorData.com® | |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. | |
Peter Easterlund - owner/author | |
Email: Peter@TractorData.com | |
Updated on April 6, 2022 |