Allis Chalmers 6040
| | 1974 - 1975 |
| Utility tractor | | Renault built |
|
Series map:
6040
44.8hp*
*Estimated engine power for comparison only.
| Production |
| Distributor | Allis Chalmers
|
| Manufacturer | Renault
|
| Utility tractor |
| Built in France |
| Total built | 499
|
| Original price | $6,934
|
| The Allis-Chalmers 160 was built by Renault. It was based on the model 421, but used a Perkins diesel in place of the MWM. |
| Allis Chalmers 6040 Power |
| Drawbar (claimed) | 36.7 hp
27.4 kW
|
| PTO (claimed) | 40.36 hp
30.1 kW
|
| Drawbar (tested) | 36.71 hp
27.4 kW
|
| PTO (tested) | 40.36 hp
30.1 kW
|
 Performance test details ... |
| Mechanical |
| Two-wheel drive |
| Differential lock | mechanical rear
|
| Power steering |
| Differential mechanical dry disc brakes |
| Open operator station. Two-post fixed ROPS available. |
| Capacity |
| Fuel | 12 gal
45.4 L
|
| Hydraulic system | 7.25 gal
27.4 L
|
| Hydraulics |
| Type | open center
|
| Capacity | 7.25 gal
27.4 L
|
| Pressure | 2300 psi
158.6 bar
|
| Pump flow | 6.7 gpm
25.4 lpm
|
| Total flow | 13.2 gpm
50.0 lpm
|
| Steering flow | 7.5 gpm
28.4 lpm
|
| Steering press. | 1100 psi
75.8 bar
|
| Tractor hitch |
| Rear Type | II
|
| Control | lower-link draft sensing
|
| Power Take-off (PTO) |
| Rear PTO | live
|
| Clutch | dry disc
|
| Rear PTO Type | 540 (1.375)
|
| Engine RPM | 540@2160
|
| 6040 Serial Numbers |
| Location: | Serial number plate on the right-front of the fuel tank, under the hood.
|
| Electrical |
| Ground | negative
|
| Charging system | alternator
|
| Battery volts | 12
|
| References |
 |
| Operator's Manual One-Ninety and One-Ninety XT Tractors (2074367) published in 1974 |
| Page information |
 |
| Copyright 2025 TractorData.com® |
| TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
| Peter Easterlund - owner/author |
| Email: Peter@TractorData.com |
| Updated on January 1, 2025 |
©2000-2025 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.
Engine details ...
Transmission details ...
Full dimensions and tires ...