John Deere 2630
| 1974 - 1975 |
Generation II Series | Utility tractor |
|
Series map:
2030
2630
68.0hp
78.2hp*
*Estimated engine power for comparison only.
Production |
Manufacturer | John Deere
|
Utility tractor |
Built in Dubuque, Iowa, USA |
Original price was $11,000 in 1975 |
Mechanical |
Two-wheel drive |
Steering | mechanical with power assist
|
Differential hydraulic wet disc brakes |
Open operator station. |
Capacity |
Fuel | 19.5 gal 73.8 L
|
Hydraulic system | 10 gal 37.9 L
|
Hydraulics |
Type | closed center
|
Capacity | 10 gal 37.9 L
|
Pressure | 2250 psi 155.1 bar
|
Valves | 1
|
Pump flow | 6 gpm (transmission) 22.7 lpm
|
  | 8.5 gpm (remotes) 32.2 lpm
|
  | 18.5 gpm (optional) 70.0 lpm
|
Total flow | 14.5 gpm 54.9 lpm
|
  | 24.5 gpmOptOptional 92.7 lpm
|
Tractor hitch |
Rear Type | II
|
Power Take-off (PTO) |
Rear PTO | independent
|
Rear PTO Type | 540
|
  | 540/1000 (optional)
|
Front PTO | optional
|
Front PTO Type | 1000
|
2630 Serial Number Location |
|
Serial number plate on the right side of the Deere 2630 frame, above the front axle. |
Electrical |
Ground | negative
|
Battery volts | 12
|
References |
|
Operator's Manual 145 Loader (OMW21474) |
Page information |
|
Copyright 2024 TractorData.com® |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
Peter Easterlund - owner/author |
Email: Peter@TractorData.com |
Updated on October 11, 2018 |
http://techpubs.deere.com/ - Official operator manuals for purchase or download from Deere.
|
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.