Challenger MT645D
| | 2011 - 2013 |
| MT600D Series | | Row-Crop tractor |
|
Series map:
MT645D
MT655D
240.0hp
265.0hp
| Production |
| Manufacturer | Challenger (a part of AGCO)
|
| Row-Crop tractor |
| Built in Jackson, Minnesota, USA |
| Original price was $263,455 in 2013 |
| Variants |
| 8650 | similar Massey Ferguson model
|
| Challenger MT645D Power |
| Engine (gross) | 240 hp
179.0 kW
|
| PTO (claimed) | 205 hp
152.9 kW
|
| Drawbar (tested) | 170.7 hp
127.3 kW
|
| PTO (tested) | 250.8 hp
187.0 kW
|
 Performance test details ... |
| Mechanical |
| Four-wheel drive |
| Final drives | inboard planetary
|
| Differential lock | electro-hydraulic
|
| Steering | hydrostatic power
|
| Hydraulic wet disc brakes |
| Trailer brakes | pneumatic (optional)
|
| | hydraulic (optional)
|
| Cab standard with air-conditioning and OptiRide Plus hydraulic suspension AGCO System 150 (optional); AGCOMMAND (optional) |
| Photos |
| No photos of the Challenger MT645D are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
| Capacity |
| Fuel | 167 gal
632.1 L
|
| Exhaust fluid (DEF) | 16 gal
60.6 L
|
| Hydraulic system | 29.1 gal
110.1 L
|
| Hydraulics |
| Type | closed center load sensing (CCLS)
|
| Capacity | 29.1 gal
110.1 L
|
| Pressure | 2900 psi
200.0 bar
|
| Valves | 4 to 6
|
| SCV flow | 26.4 gpm
99.9 lpm
|
| Total flow | 46 gpm
174.1 lpm
|
| Tractor hitch |
| Rear Type | III
|
| Rear lift | 22760 lbs
10323 kg
|
| Front Hitch | III (optional)
|
| Front lift (at ends) | 11000 lbs
4989 kg
|
| Drawbar | Cat. 3
|
| | Cat. 3 Heavy-Duty (optional)
|
| | Cat. 4 (optional)
|
| Power Take-off (PTO) |
| Rear PTO | independent
|
| Clutch | electro-hydraulic
|
| Rear PTO Type | 1000/1000E (1.75)
|
| | 540E/1000/1000E (optional)
|
| Engine RPM | 540E@1577
|
| | 1000E@1605
|
| | 1000@1970
|
| Electrical |
| Ground | negative
|
| Charging system | alternator
|
| Charging amps | 240
|
| Batteries | 2
|
| Battery volts | 12
|
| References |
 |
| Challenger MT600D Series published in 2011, by AGCO |
| Page information |
 |
| Copyright 2024 TractorData.com® |
| TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. |
| Peter Easterlund - owner/author |
| Email: Peter@TractorData.com |
| Updated on October 21, 2022 |
©2000-2024 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.
Engine details ...
Transmission details ...
Full dimensions and tires ...